SMAD22SD
Specification
COMPRESSOR
Type
Rotating screw, 2-stage compressed unlubricated
Air delivery (m3/min)
3.7
Working pressure (MPa[kgf/cm2][psi])
0.7[7.14][102]
Air control system
2-position control
+ A.C.C.S.
+ Purge control
+ Automatic start/stop
+ A.C.C.S.
+ Purge control
+ Automatic start/stop
Lubricant oil capacity (L)
12.0
Discharge air pipe diameter (A[inch])
25[1"]
MOTOR
Rated output (kW)
22
Frequency (Hz)
50/60
Voltage (V)
200/200・220 (400/400・440)
Starting system
Y-△
DRYER
Model
Built-in
Outlet dew point (℃)
Below 10 (under pressure)
DIMENSION & WEIGHT
L×W×H (mm)
2040×900×1570
Operating weight (kg)
1010
Noise level (dB[A])
60
FUNCTION & OTHER
Automatic start/stop
○
Dryer advance operation
○
Remote control functions
○
Instantaneous power outage restart function
○(2 Seconds)
Comp bearing replacement cycle (Year[h])
6[48,000]
●Air delivery is calculated assuming the intake conditions is at atmospheric pressure and at a temperature of 30°C. For the guaranteed value of air delivery, please contact us.
●Be sure to use our genuine compressor oil.
●The noise values are calculated assuming the anechoic chamber conditions are at a distance of 1.5 m from the front (operating side) of the compressor, at a height of 1.0 m, and at an outside temperature of 30°C during full-load operation.
●Specifications are subject to change without prior notice. For details, please confirm with the sales representative or the manufacturer.
