SAS75VD
Specification
COMPRESSOR
Type
Rotary Twin Screw, Single-Stage, Oil-Injected
Air delivery (m3/min)
14.2 (16.1 - 12.5)
Operating pressure (MPa [kɡf/cm2] [psi])
0.7 (0.5 - 0.9)
[7.14 (5.10 - 9.18)
[102 (72.5 - 130.5)]
[7.14 (5.10 - 9.18)
[102 (72.5 - 130.5)]
Air control system
Inverter control
+ Purge control
+ Automatic start/stop
+ Purge control
+ Automatic start/stop
Intake conditions (℃)
Atmospheric pressure, 2-40°C
Lubricant oil capacity (L)
42
Discharge air pipe diameter (inch)
2"
Nominal output of the fan motor (kW)
1.5
MOTOR
Type
Totally-enclosed IPM 3 phase synchronous motor
Rated output (kW)
75
Frequency (Hz)
Both 50 / 60
Voltage (V)
200/200・220 (400/400・440)
No. of poles
6
Starting system
Inverter
DRYER
Input (chiller nominal output) (kW)
2.3 / 2.7 (1.9)
Outlet dew point (℃)
Below 10 (under pressure)
Coolant
R410A
DIMENSION & WEIGHT, etc
L×W×H (mm)
2450×1150×1570
Operating weight (kg)
1485 (1370)
Noise level (dB[A])
62
※ Air delivery is calculated assuming the intake conditions is at atmospheric pressure and at a temperature of 30°C. For the guaranteed value of air delivery, please contact us.
※ The numbers in parentheses “()” for weight are for dryerless specs.
※ The noise values are calculated assuming the anechoic chamber conditions are at a distance of 1.5 m from the front (operating side) of the compressor, at a height of 1.0 m, and at an outside temperature of 30°C during full-load operation.
・For details, please refer to the product catalog.
・Specifications are subject to change without notice.
