SASG19RD
Specification
COMPRESSOR
Type
Rotary Twin Screw, Single-Stage, Oil-Injected
Air delivery (m3/min)
2.0
Operating pressure (MPa)[kɡf/cm2][psi]
1.4 [14.28] [203]
Air control system
Regulator control
+ Purge control
+ Automatic start/stop
+ Purge control
+ Automatic start/stop
Intake conditions (℃)
Atmospheric pressure, 2-40°C
Lubricant oil capacity (L)
12
Discharge air pipe diameter (inch)
3/4"
Nominal output of the fan motor (kW)
0.75
MOTOR
Type
Fully-enclosed, external fan, 3-phase squirrel cage induction motor
Rated output (kW)
18.5
Frequency (Hz)
50 / 60
Voltage (V)
200/200・220 (400/400・440)
No. of poles
2
Starting system
Direct input
DRYER
Input (chiller nominal output) (kW)
0.5 / 0.5 (0.6)
Outlet dew point (℃)
Below 10 (under pressure)
Coolant
R410A
DIMENSION & WEIGHT, etc
L×W×H (mm)
1260×710×1350
Operating weight (kg)
555
Noise level (dB[A])
55
※ Air delivery is calculated assuming the intake conditions is at atmospheric pressure and at a temperature of 30°C. For the guaranteed value of air delivery, please contact us.
※ The numbers in parentheses “()” for weight are for dryerless specs.
※ The noise values are calculated assuming the anechoic chamber conditions are at a distance of 1.5 m from the front (operating side) of the compressor, at a height of 1.0 m, and at an outside temperature of 30°C during full-load operation.
・For details, please refer to the product catalog.
・Specifications are subject to change without notice.
